New Tutorial "Rosie Elegance"

"Rosie Elegance"

I wrote this Tutorial on July 30th, 2009.
Any resemblance to another Tutorial online is purely accidental.
You will need any version of Paint Shop Pro. A good working knowledge of
Working with masks.

Scrapkit i am using is by Monica of Simply Sensational Scraps.
Called..."Rosie Elegance"
Here

Tube of choice, Font of choice. Becky_Mask022, or similar.
I am using the artwork of Ismal Rac. Please do not use the same tube
Without the proper license to do so. You may find his tubes.
Here or Here

"Ready, Let's Go"

Open a new 600x600 blank canvas and floodfill with white.
Copy and paste paper 3, open Becky_Mask022 and apply. Duplicate the
Mask layer, and on the original, adjust, blur, gaussian blur of 20%, click ok.
Hide your white background and merge the mask layers visible.
Pull the merged mask layer out to fit canvas and add a slight drop shadow.
Unhide the white background.

Open doodle 1, copy and paste on top of merged mask layer, and pull it out
On all sides to fit canvas. add a drop shadow. Repeat this same step for
Doodle 2. or see my tag as a reference. sharpen as needed.

Open foliage 3, copy and paste over the mask layer, position to the right.
Duplicate this layer and move down a little, add drop shadows.
Open frame 3, copy and paste on top of all layers, add a drop shadow, sharpen.

On frame 3, magic wand, click inside the frame, expand by 8.
Open paper 3, copy and paste on top of frame, selections invert hit delete.
Select none. Back on the frame 3 layer, magic wand, expand by 8, open
Ribbon 7, position, selections invert, hit delete. select none. open
Your tube, selections invert, hit delete, select none. move tube below the frame.
Add a drop shadow to the tube.

Open frame 2, copy and paste onto your canvas. resize to your liking.
Magic wand, click inside the frame 2, expand by 8, copy and paste paper 15.
Selections invert, hit delete, select none. back on the frame 2 layer, magic wand.
Expand by 8, add your tube, position inside the frame, selections invert, hit delete.
Select none, move the tube down under the frame 2 layer.
Add a drop shadow to the tube. Hide all layers except for frame 2, paper 15
And tube, merge these layers visible. Rotate image slightly to the right.

Open your tube again, copy and paste on top of all other layers.
Position her to the left side. add a drop shadow to the tube.
Open Roses 7 and 8, resize, copy and paste onto the frame 2 image.
Add drop shadows to the roses. see my tag for placement.

Opn bow 7, resize to your liking and place to the left of frame 3.
Rotate the bow layer, use my tag as a reference. Drop shadow the bow.
Open flower 8, copy and paste, position on the top right. add a drop shadow.
Open butterflycharm 2, copy and paste onto canvas. position it on top of flower 8.
Add a drop shadow and sharpen if needed.

Open butterfly 3, resize and place it to the bottom left side, add a drop shadow.
Open bowflower 3, position it to the right side middle. drop shadow.
Open heart 4, resize and position it to the right side of the small image.
Add a drop shadow, duplicate, image mirror and position.
See my tag for placement. add your name in font of choice. drop shadow.

Add artist copyright info and your watermark.
Save as a .png file.

Thanks for trying my Tutorial.
This Tutorial is copyrighted to me. Please do not claim as yours.
©Donna's Designzs.
Http://donnasdesignzs.blogspot.com/

"New Tutorial" "Black And White Sweety"

Black And White Sweety

I wrote this Tutorial on July 24th, 2009.
Any other Tutorial online is purely coincidence.
You will need any version of Paint Shop Pro. a good knowledge of
Working with masks.
My Black And White PTU scrap kit.
Here

Tube of choice, Font of choice. Wsl_Mask143.
You may find the mask.
Here

I used the Fantastic artwork of Ismal Rac.
You may find his tubes at Artistic Minds Inc. Please Do Not
Use the same tube as me without the proper license to do so.

Let's Stsrt

Open a new 600x600 blank canvas and floodfill with white.
Copy and paste a paper of choice from the kit.
Open your mask, go to layers, new mask from image, source luminance
Checked. invert mask unchecked. apply mask. Duplicate the mask layer.
On the original mask layer, go to adjust, blur, gaussian blur of 20%. click ok.
Hide your white background and merge the 2 mask layers visible.
Add a slight drop shadow (optional).

Open one of the round frames of choice from the kit.
Copy and paste onto your canvas, with magic wand, click inside the frame.
Selections modify, expand by 6, copy and paste a paper of choice.
Selections invert, hit delete, select none. move this layer below the frame.
Back on the frame layer, magic wand, expand by 6, add your tube.
Selections invert, hit delete. add a drop shadow to the tube.
Make sure the tube is on top of the paper layer.

Add any embellishments you want from the kit and position where you want.
Or use my tag as a reference. add drop shadows to the embellishments.
Add your name in font of choice, add a drop shadow.
Add your tube again on top of all layers, add a drop shadow and move
Her to the left side. add a drop shadow to the tube.

Add artist copyright info and your watermark.
Save as .png file.

This Tutorial is copyrighted to me. Please do not claim as your own.
©Donna's Designzs
Http://DonnasDesignzsBlogspot.Com/
Here

New Tutorial "Timeless Beauty"

"Timeless Beauty"

I wrote this Tutorial on July 21st, 2009.
Any resemblence to another tut online is purely coincidence.
You will need any version of Paint Shop Pro.
A good knowledge of working with masks.
Scrap kit used is by Joint Venture. Sadiescrap130309-itha.
Here

Wsl_Mask226, Font Of Choice, Tube Of Choice.

I am using the awesome artwork of Ismal Rac.
Please Do Not use the same tube without an AMI License.
You may find his tubes.
Here

Ready, Let's Go
Open a new 600x600 blank canvas and floodfill with white.
Copy and paste a paper of choice from the kit.
Open your Wsl_Mask226, go to layers, new mask from image, source luminance
Checked, invert unchecked and apply mask. duplicate the mask layer.
And on the original mask layer, go to adjust, blur, gaussian blur of 20%.
Click ok. hide the white background and merge the 2 mask layers visible.
Unhide your white background. Pull the mask layer out to fit canvas.

Repeat this step above with another paper from the kit.
Only do not pull the mask layer out to fit canvas.
Hide your white background and merge all mask layers together.
Unhide your white background.

Open doodles sc-element 21c-itha and sc-element 21b-itha.
Copy and paste sc-element 21c-itha underneath the merged mask layer.
Add a drop shadow of choice. duplicate, image mirror and position.
Use my tag as a reference. Repeat this step with sc-element 21b-itha.

Open the sc-frame05-itha. copy and paste the frame onto canvas.
Add a drop shadow. with magic wand, click inside the frame, selections, modify
Expand by 6. copy and paste a paper of choice, selections invert, hit delete.
Selections none. back on the frame layer, click inside with magic wand,
Selections modify, expand by 6. copy and paste your tube, selections invert hit delete.
Selections none. drop shadow the tube.
Copy and paste your tube again on top of all layers. position her where you want.
Add a drop shadow to the tube.

Open sc-element24-itha. copy and paste on top of the merged mask layer.
Add a drop shadow. position to the top right side. duplicate, image mirror.
Duplicate again and image flip, move more towards the bottom middle.

Open sc-frame02-itha. copy and paste on top of all layers.
Add a drop shadow. resize frame to your liking. with magic wand, click
Inside frame, selections modify, expand by 6, copy and paste a paper of choice.
Selections invert, hit delete. selections none. back on the frame layer, add your tube.
Selections invert, hit delete. select none. drop shadow the tube.
Hide all layers except for the image we just made, merge visible. unhide all layers.
Move this merged image to the bottom left and angle it slightly.

Now open all other embellishments of your choice and position where you want.
Add drop shadows to all embellishments. or use my tag for placement.
Add your name in font of choice, add a drop shadow.

Add all artist copyright info and your watermark.
Save as a .png file.
Thank you for trying my Tutorial.
Huggles, Donna.

This Tutorial is copyrighted to me.
©Donna's Designzs.
Http://donnasdesignzs.blogspot.com/

"Pretty Blues Tutorial"

"Pretty Blues Tutorial"

I wrote this tut on July 4th, 2009.
Any resemblance to another tut online is purely coincidence.

You will need any version of Paint Shop Pro.
You also need a good knowledge of using templates and masks.

My Pretty Blues scrap kit you may find.
Here

I am using a template by Missy or choose a template similar to one i used.
Missy_template5
Mask i used is by Weecostlass.
Wsl_Mask61.
Or choose a mask of your choice.

I am using the awesome artwork of Ismal Rac.
You may find his tubes.
Here

Please Do Not use the same tube without the proper license from AMI.

Ready, Let's Start.

Open your template in Psp, shift D to duplicate and close the original.
Open your mask. Shift D to duplicate, close the original.

On the circle layer select all, selections float, defloat, copy and paste
A paper of choice from the kit, selections invert, hit delete, select none.
Delete the circle layer, add a drop shadow.

On the rectangle layer, selections all, float, defloat, copy and paste
A paper of choice from the kit, selections invert, hit delete, select none.
Delete the rectangle layer, add a drop shadow.

Repeat the steps above for all other template layers.
Add drop shadows.

On your white background, copy and paste a paper of choice from the kit.
Open your mask of choice and apply. duplicate the mask layer,
On the original mask layer, go to adjust, blur, gaussian blur of 20%, click ok.
Hide all layers except for the 2 mask layers and merge visible.
Pull the merged mask layer to fit the canvas.

Add any embellishments from the kit and position where you want.
Add drop shadows, sharpen if needed. see my tag as a
Reference on placement.

Add your name in patterns or colors and add a drop shadow.
Add artist copyright info and your watermark.
Save as a .png file.

Thank you for trying my Tutorial.
This tutorial is copyrighted to me ©Donna's Designzs.
Please Do Not claim as your own. My Blog.
Here